Sònrachaidhean
Tha dath fuar Jindaalai air a roiligeadh notaichean aluminum a 'gluasad crìochnachaidh-crìochnachaidh gus inbhean eadar-nàiseanta a mhaidseadh. Tha cumadh math aca, fulangas àrd, fàirdeal agus uachdar an-asgaidh a th 'annta. Tha iad air an cleachdadh ann an tagraidhean innleadaireachd malairteach agus innleadaireachd coitcheann leithid buidhnean bus, air anlacadh agus lannan luchd-leantainn. Bidh a 'chompanaidh a' coinneachadh ri iarrtasan a 'chlèirle a tha a' sìor fhàs le ùrachadh leantainneach agus leasachadh pròiseas.
Alloys cumanta
| Tomhasan | |||
| Paramadair | Raon | Àbhaisteach | Fulangas |
| Tighead (mm) | 0.1 - 4.0 | - | Airson 0.16 gu 0.29 +/- 0.01 |
| Airson 0.30 gu 0.71 +/- 0.05 | |||
| Airson 0.72 gu 1.40 +- 0.08 | |||
| airson 1.41 gu 2.00 +/- 0.11 | |||
| Airson 2.01 gu 4.00 +/- 0.12 | |||
| Leud (mm) | 50 - 1620 | 914, 1219, 1525 | Slit Coil: +2, -0 |
| Id (mm) | 508, 203 | - | - |
| Dùmhlachd coil (kg / mm) | 6 Max | - | - |
| Gheibhear guill ceils cuideachd ann an raon tiugh 0.30 - 1.10 mm. | |||
| Togalaichean meacanaigeach | |||||||
| Alloy (AA) | Temper | Uuts (MPA) | % E (min) (Fad 50mm Fad) | ||||
| Mion | Max | ||||||
| 0.50 - 0.80 mm | 0.80 - 1.30 mm | 1.30 - 2.6 0mm | 2.60 - 4.00 mm | ||||
| 1050 | O | 55 | 95 | 22 | 25 | 29 | 30 |
| 1050 | H14 | 95 | 125 | 4 | 5 | 6 | 6 |
| 1050 | H18 | 125 | - | 3 | 3 | 4 | 4 |
| 1070 | O | - | 95 | 27 | 27 | 29 | 34 |
| 1070 | H14 | 95 | 120 | 4 | 5 | 6 | 7 |
| 1070 | H18 | 120 | - | 3 | 3 | 4 | 4 |
| 1200, 1100 | O | 70 | 110 | 20 | 25 | 29 | 30 |
| 1200, 1100 | H14 | 105 | 140 | 3 | 4 | 5 | 5 |
| 1200, 1100 | H16 | 125 | 150 | 2 | 3 | 4 | 4 |
| 1200, 1100 | H18 | 140 | - | 2 | 2 | 3 | 3 |
| 3103, 3003 | O | 90 | 130 | 20 | 23 | 24 | 24 |
| 3103, 3003 | H14 | 130 | 180 | 3 | 4 | 5 | 5 |
| 3103, 3003 | H16 | 150 | 195 | 2 | 3 | 4 | 4 |
| 3103, 3003 | H18 | 170 | - | 2 | 2 | 3 | 3 |
| 3105 | O | 95 | 145 | 14 | 14 | 15 | 16 |
| 3105 | H14 | 150 | 200 | 4 | 4 | 5 | 5 |
| 3105 | H16 | 175 | 215 | 2 | 2 | 3 | 4 |
| 3105 | H18 | 195 | - | 1 | 1 | 1 | 2 |
| 8011 | O | 85 | 120 | 20 | 23 | 25 | 30 |
| 8011 | H14 | 125 | 160 | 3 | 4 | 5 | 5 |
| 8011 | H16 | 150 | 180 | 2 | 3 | 4 | 4 |
| 8011 | H18 | 175 | - | 2 | 2 | 3 | 3 |
| Co-sgrìobhadh ceimigeach | ||||||
| Alloy (%) | AA 1050 | Aa 1200 | AA 3003 | AA 3103 | AA 3105 | Aa 8011 |
| Fe | 0.40 | 1.00 | 0.70 | 0.70 | 0.70 | 0.60 - 1.00 |
| Si | 0.25 | (FE + SI) | 0.60 | 0.50 | 0.6 | 0.50 - 0.90 |
| Mg | - | - | - | 0.30 | 0.20 - 0.80 | 0.05 |
| Mn | 0.05 | 0.05 | 1.0 - 1.50 | 0.9 - 1.50 | 0.30 - 0.80 | 0.20 |
| Cu | 0.05 | 0.05 | 0.05 - 0.20 | 0.10 | 0.30 | 0.10 |
| Zn | 0.05 | 0.10 | 0.10 | 0.20 | 0.25 | 0.20 |
| Ti | 0.03 | 0.05 | 0.1 (ti + zr) | 0.1 (ti + zr) | 0.10 | 0.08 |
| Cr | - | - | - | 0.10 | 0.10 | 0.05 |
| Gach fear (cuid eile) | 0.03 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
| Gu h-iomlan (feadhainn eile) | - | 0.125 | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | 99.50 | 99 | An còrr | An còrr | An còrr | An còrr |
| Tha àireamh singilte a 'comharrachadh an susbaint as motha | ||||||
Alloys làidir
| Tomhasan | ||
| Paramadair | Raon | Fulangas |
| Tighead (mm) | 0.3 - 2.00 | Airson 0.30 gu 0.71 +/- 0.05 |
| Airson 0.72 gu 1.4 +/- 0.08 | ||
| airson 1.41 gu 2.00 +/- 0.11 | ||
| Leud (mm) | 50 - 1250 | Slit Coil: +2, -0 |
| Id (mm) | 203, 305, 406 airson tiùrrachadh <0.71 | - |
| 406, 508 airson tiugh> 0.71 | ||
| Dùmhlachd (kg / mm) | 3.5 Max | - |
| Togalaichean meacanaigeach | ||||
| Alloy (AA) | Temper | Uuts (MPA) | % E (min) (Fad 50mm Fad) | |
| Mion | Max | |||
| 3004 | O | 150 | 200 | 10 |
| 3004 | H32 | 193 | 240 | 1 |
| 3004 | H34 | 220 | 260 | 1 |
| 3004 | H36 | 240 | 280 | 1 |
| 3004 | H38 | 260 | - | 1 |
| 5005 | O | 103 | 144 | 12 |
| 5005 | H32 | 117 | 158 | 3 |
| 5005 | H34 | 137 | 180 | 2 |
| 5005 | H36 | 158 | 200 | 1 |
| 5005 | H38 | 180 | - | 1 |
| 5052 | O | 170 | 210 | 14 |
| 5052 | H32 | 210 | 260 | 4 |
| 5052 | H34 | 23030 | 280 | 3 |
| 5052 | H36 | 255 | 300 | 2 |
| 5052 | H38 | 268 | - | 2 |
| 5251 | O | 160 | 200 | 13 |
| 5251 | H32 | 190 | 23030 | 3 |
| 5251 | H34 | 210 | 250 | 3 |
| 5251 | H36 | 23030 | 270 | 3 |
| 5251 | H38 | 255 | - | 2 |
| Co-sgrìobhadh ceimigeach | ||||
| Alloy (%) | AA 3004 | AA 5005 | AA 5052 | AA 5251 |
| Fe | 0.70 | 0.70 | 0.40 | 0.50 |
| Si | 0.30 | 0.30 | 0.25 | 0.40 |
| Mg | 0.80 - 1.30 | 0.50 - 1.10 | 2.20 - 2.80 | 1.80 - 2.40 |
| Mn | 1.00 - 1.50 | 0.20 | 0.10 | 0.10 - 0.50 |
| Cu | 0.25 | 0.20 | 0.10 | 0.15 |
| Zn | 0.25 | 0.25 | 0.10 | 0.15 |
| Ti | - | - | - | 0.15 |
| Cr | - | 0.10 | 0.15 - 0.35 | 0.15 |
| Gach fear (cuid eile) | 0.05 | 0.05 | 0.05 | 0.05 |
| Gu h-iomlan (feadhainn eile) | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | An còrr | An còrr | An còrr | An còrr |
| Tha àireamh singilte a 'comharrachadh an susbaint as motha | ||||
Pacadh
Tha na daoine air am pacadh ann an suidheachadh sùla-grèine no balla-balla, air a phasgadh ann am HDEP agus Hardboard, air an stàladh air an slaodadh air paterlets fiodha. Tha dìon taiseachd air a thoirt seachad le pacaidean silica gel.
Tagraidhean
● Càistean bus agus cuirp
● insulation
• air an còmhdach ann an togalaichean, panalan co-èigneachail alùmanum, mullaichean meallta agus panalling (sìmplidh no còmhdach le còmhdach dath)
● Dealain Dealain, sùbailte, stiallan cruth-eòlas, msaa
Dealbh mion-fhiosrachaidh
